• 3 3/4″ – 100 mm.
• Miniature cutting, predominantly angled blades, superior finish.
• Suitable to applications which require cutting very small material or performing very small cuts, soft metal strands (e.g. Copper).
  
• The micro blades are designed to apply maximum cutting force while granting maximum visibility.

Body material: Inox – Stainless steel type S.

• Martensitic higher carbon steel (Material number 1.4034, DIN X46Cr13, AISI number 420).
  
• Contains from 12.5 to 14.5 wt% chromium.
• Magnetizable.
• Can be hardened by heat treatment, forming should be done in the annealed condition.
• Less resistant to corrosion than the austenitic or ferritic grades.
• Used where strength and/or hardness are of primary concern and where the environment is relatively mild from a corrosive standpoint.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in mild aggressive chemical environments.