Plastic type CF

• PA66/CF30 polyamide 66 reinforced with 30 wt% carbon fibre.
• Heat stabilized.
• Very high rigidity, excellent tensile and flexural strength, fatigue and creep resistance.
• Low friction, self lubricating properties, excellent wear and abrasion resistance.
• Good heat capability.
• Good chemical resistance (oils, grease, fuels, non-polar solvents); not resistant to strong acids, alkalis and hot water or steam.
• ESD safe material, (avoid powder attraction, sparks generation, ignition sources).
• Very low coefficient of linear thermal expansion.
• Typical applications include handling of sensitive components and devices (electronic components, micro-mechanical parts, glass and ceramic substrates, capillary, etc.).

High-Performance Plastic type CP

• PEEK/CF30 polyetheretherketone reinforced with 30 wt% carbon fibre.
• Very hard, rigid, high tensile and flexural strength, very high wear resistance.
• High heat capability (260-300°C), good dimension stability, low thermal linear expansion coefficient.
• Excellent resistance to chemicals, aggressive agents and to thermal ageing.
• ESD safe material, low surface resistivity (10⁵ Ohm).
• Typical applications include handling of components in cleaning/chemical/assembly processes also at high temperatures (soldering).

Stainless Steel body type SA

• Low carbon Austenitic steel.
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable.
• Good corrosion resistance to most chemicals, salts and acids.
• Generally used where corrosion resistance and toughness are primary requirements.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.