IDEAL-TEK: High Precision - Plastic Replaceable Tip Tweezers

2WF Plastic Replaceable Wafer Tip Tweezers

Quick overview

  • 5″ – 130 mm.
  • Handling 2″, fine, round, strong top fingers, stepped bottom paddle tips.
  • Suitable to delicate applications which require holding a 2 inch flat component firmly.
  • The carbon fiber reinforced ESD and non-scratching properties.

Tip material: High-performance plastic type CP.

  • PEEK – polyetheretherketone reinforced with carbon nano.
  • ESD safe material 105-106 Ohm.
  • Very hard, rigid, high tensile and flexural strength, very high wear resistance.
  • High heat capability (260-300°C), good dimension stability, low thermal linear expansion coefficient.
  • Excellent resistance to chemicals and aggressive agents, excellent resistance to thermal ageing.
  • Typical applications include handling of components in cleaning/chemical/assembly processes also at high temperature (soldering).

Tip material: High-performance plastic type SV.

  • PVDF – polyvinylidene fluoride carbon fiber reinforced.
  • ESD safe material, (avoid powder attraction, sparks generation, ignition sources).
  • Smooth surface, excellent mechanical strength and toughness.
  • Heat stabilized, high heat capability, continuous use temperature up to 150°C.
  • High purity (clean room and medical devices approved, low extraction value).
  • Excellent chemical resistance to most aggressive substances (mineral and organic acid) and solvents (hydrocarbons, alcohols, halogenated), resistant to halogens.
  • Outstanding resistance to hydrofluoric acid (40% conc., 90°C), nitric acid (50% conc., 90°C), hydrochloric acid (36% conc., 90°C).
  • High abrasion resistant.
  • Resistant to UV and nuclear radiation (sterilisation).
  • Typical applications include handling of very scratch- and contamination-sensitive components, cleaning and etching processes.

Body material: Stainless Steel type SA.

  • Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
  • Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
  • Non-magnetizable (80%).
  • Good corrosion resistance to most chemicals, salts and acids.
  • Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.
E-Mail
Item Code
2WFCPR@.SA Stainless Steel (SA) - CARBON PEEK (CP) 0.70 6.70 10.00 18 10 0 2WFCPR@.SA.1.IT 1.019.000 đ ADD
2WFSVR.SA Stainless Steel (SA) - PVDF (SV) 0.70 6.70 10.00 18 10 0 2WFSVR.SA.1.IT 1.019.000 đ ADD
A2WFCP@ Kit of 2 CARBON PEEK (CP) tips and 3 screws, L = 40 mm 0.70 6.70 18 12 0 A2WFCP@ 380.000 đ ADD
A2WFSV Kit of 2 PVDF (SV) tips and 3 screws, L = 40 mm 0.70 6.70 18 12 0 A2WFSV 380.000 đ ADD

Price excluding tax

RELATED PRODUCTS

8WTC1 Wafer ESD Teflon Tip Tweezers

View Details

8WNY Wafer Nylon Tip Tweezers

View Details

8WL Plastic Replaceable Wafer Tip Tweezers

View Details

4WF Plastic Replaceable Wafer Tip Tweezers

View Details

Notice