IDEAL-TEK: Precision Tweezers [H-series]

3 Precision Tweezers [H-series]

Quick overview

4 3/4′  120 mm
Very sharp, fine

Stainless steel type SA

  • Low carbon Austenitic steel.
  • Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
  • Non-magnetizable.
  • Good corrosion resistance to most chemicals, salts and acids.
  • Generally used where corrosion resistance and toughness are primary requirements.
  • Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

Inox Steel type S

  • Martensitic higher carbon steel.
  • Magnetizable.
  • Contains from 12.5 to 14.5 wt% chromium.
  • Can be hardened by heat treatment, forming should be done in the annealed condition.
  • Less resistant to corrosion than the Austenitic or Ferritic grades.
  • Used where strength and/or hardness are of primary concern and where the environment is relatively mild from a corrosive standpoint.
  • Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in mild aggressive chemical environments.

Teflon coating type TE

  • This solvent-based liquid Teflon® coating is formulated with special blends of fluoropolymers and other high-performance resins to improve toughness and abrasion resistance.
  • Non-stick: Very few solid substances will permanently adhere to a Teflon® finish. Although tacky materials may show some adhesion, almost all substances release easily.
  • Low coefficient of friction: The coefficient of friction of this Teflon® coating is generally in the range of 0.20 to 0.25, depending on the load, sliding speed, and particular Teflon® coating used.
  • Non-wetting: Since surfaces coated with Teflon® are both oleophobic and hydrophobic, they are not readily wetted. Cleanup is easier and more thorough — in many cases, surfaces are self-cleaning.
  • Heat resistance: Can operate continuously at temperatures up to 150°C and can be used for intermittent service up to 200°C.
  • Unique electrical properties: Over a wide range of frequencies, Teflon® has high dielectric strength, low dissipation factor, and very high surface resistivity.
  • Cryogenic stability: Many Teflon® industrial coatings withstand severe temperature extremes without loss of physical properties. Teflon® industrial coatings may used at temperatures as low as -270°C/-454°F.
E-Mail
Item Code
3-H.SA Anti-Magnetic Anti-Acid Stainless Steel 0 3 SA 1 643.000 đ ADD
3-H.S Inox Steel 0 3.S.1 681.000 đ ADD
3-H.SA-T Anti-Magnetic Anti-Acid Stainless Steel with Teflon coating 0 3.SA.T.1 1.148.000 đ ADD

Price excluding tax

RELATED PRODUCTS

2AB Precision Tweezers [H-series]

View Details

09C Precision Tweezers [H-series]

View Details

0 Precision Tweezers [H-series]

View Details

SS Precision Slim Tweezers [H-series]

View Details

Notice
Gọi ngay