• 6″ – 150 mm.
• Thick, blunt, straight, rhomb serrated tips and serrated handles.
  
• Suitable to applications which require holding a component very firmly. The line serration provides the handles with extra grip and the rhomb serrated tips prevent any possible slips.

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 6″ – 150 mm.
• Fine, bent, beveled, rhomb serrated tips and serrated handles.
  
• Suitable to applications which require holding a component very firmly. The bent geometry provides maximum visibility and increased ergonomics. The line serration provides the handles with extra grip and the rhomb serrated tips prevent any possible slips.

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 6″ – 150 mm.
• As 122, Strong, fine, bent, beveled, rhomb serrated tips and serrated handles.
  
• Suitable to applications which require holding a component very firmly. The bent geometry provides maximum visibility and increased ergonomics. The line serration provides the handles with extra grip and the rhomb serrated tips prevent any possible slips.

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 4 3/4″ – 120 mm.
• Fine, round, smooth, no scratch tips and serrated handles.
  
• Suitable to applications which require holding a flat and delicate component firmly. The line serration provides the handles with extra grip.
  

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 4 3/4″ – 120 mm.
• Thick, beveled, smooth, no scratch tips and serrated handles.
  
• Suitable to applications which require holding a flat and delicate component firmly. The line serration provides the handles with extra grip.
  

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 4″ – 105 mm.
• Bent, thin, squared tips and serrated handles.
  
• Suitable to applications which require holding a flat component firmly. The bent tips help to hold the component still during positioning and increase ergonomics. The line serration provides the handles with extra grip.
  

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 5 1/2″ – 135 mm.
• Strong, beveled, straight, line serrated tips and serrated handles.
  
• Suitable to applications which require holding a big component very firmly. The line serration provides the tips and the handles with extra grip, also preventing any possible slips.
  

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 4 3/4″ – 120 mm.
• For Ø 2mm cylindrical device, straight, grooved tips and serrated handles.
  
• Suitable to delicate applications which require holding a 2-millimeter cylindrical device. The line serration provides the handles with extra grip.
  

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

• 4 3/4″ – 120 mm.
• For Ø 1mm cylindrical device, straight, grooved, arc shape tips and serrated handles.
  
• Suitable to delicate applications which require holding a 1-millimeter cylindrical device. The line serration provides the handles with extra grip.
  

Body material: Stainless Steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.