• 4 1/4″ – 110 mm.
• Straight, very fine, sharp, superior finish.
  
• Suitable to delicate applications which require holding a small component firmly while granting good visibility.
  

Body material: Stainless steel type SA.

• Low carbon austenitic steel (Material number 1.4435, DIN X2CrNiMo18-14-3, AISI number 316L).
• Contains from 16.5 to 18.5 wt% chromium and has important quantities of nickel and molybdenum as additional alloying elements.
• Non-magnetizable (80%).
• Good corrosion resistance to most chemicals, salts and acids.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in moderately aggressive chemical environments.

Body material: Superalloy NC.

• Ni-Cr-Mo superalloy.
• Excellent strength from room temperature to 800°C.
• Fully non-magnetic (100%).
• Resistant to fatigue, very high shape retention.
• Excellent corrosion resistance to most chemicals, salts and acids.
• Typical applications include non-magnetic tools for electronic and watch industry applications and for laboratory and medical applications in aggressive chemical and extreme environments (aerospace, nuclear, marine).

Body material: High Alloy DX.

• Low carbon high alloy austenitic stainless steel, AISI 904L (UNS N08904).

• Its maximum service temperature is at 450°C.

• High-alloy austenitic stainless steel intended for use under severe corrosive conditions within the process industry.

• Very good resistance to attacks in acidic environments, e.g. sulphuric, phosphoric and acetic acid.

• Very good resistance to pitting in neutral chloride-bearing solutions/stress corrosion cracking.

• The grade is non-magnetic (95%) in all conditions and has excellent formability and weldability. The austenitic structure also gives this grade excellent toughness, even down to cryogenic temperatures.