IDEAL-TEK: Full Plastic Tweezers

702A Plastic Tweezers

Quick overview

  • 4 1/2″ – 115 mm.
  • Straight, very fine, round, flat tips.
  • Suitable to applications which require holding a very fragile flat component. The Carbon Fiber reinforced ESD Plastic provides the tweezers with ESD and non-scratching properties.

Engineering plastic – CARBON FIBRE (CF).

  • PA66/CF30 – polyamide 66 reinforced with 30 wt% carbon fibre.
  • ESD safe material, lead-free.
  • High mechanical strength and toughness.
  • Low friction, self lubricating properties, excellent wear and abrasion resistance.
  • Heat stabilized, 130°C (continuos use) – 190° (short time).
  • Very low coefficient of linear thermal expansion.
  • Very high rigidity, excellent tensile and flexural strength (bend strength), fatigue and creep resistance.
  • Good chemical resistance (oils, grease, fuels, non polar solvents), but not resistant to strong acids, alkalis, hot water or steam.
  • Applications include handling of sensitive components and devices (electronic components, micro-mechanical parts, glass and ceramic substrates, etc.) where non-scratching is critical. Popular in standard ESD and general electronics assembly and lab applications.

High performance plastic – PVDF (SV).

  • PVDF – polyvinylidene fluoride carbon fibre reinforced.
  • ESD safe material, (avoid powder attraction, sparks generation, ignition sources).
  • Smooth surface, excellent mechanical strength and toughness.
  • Heat stabilized, high heat capability, continuous use temperature up to 150°C.
  • High purity (clean room and medical devices approved, low extraction value).
  • Excellent chemical resistance to most aggressive substances (mineral and organic acid) and solvents (hydrocarbons, alcohols, halogenated), resistant to halogens.
  • Outstanding resistance to hydrofluoric acid (40% conc., 90°C), nitric acid (50% conc., 90°C), hydrochloric acid (36% conc., 90°C).
  • High abrasion resistant.
  • Resistant to UV and nuclear radiation (sterilisation).
  • Typical applications include handling of very scratch- and contamination-sensitive components, cleaning and etching processes.

Engineering plastic – WHITE DELRIN (DG).

  • POM/GF30 acetal resin reinforced with 30 wt% glass fibre.
  • Good tensile and flexural strength, fatigue and creep resistance.
  • Low friction, good wear and abrasion resistance.
  • Low moisture absorption and insulating.
  • Good chemical resistance (oils, grease, fuels, organic solvents); not resistant to strong acids, alkalis and oxidizing agents; good hydrolytic resistance (hot water).
  • Typical applications include handling of very scratch sensitive components (ceramic and glass devices, wafers, capillary).
Item Code
702A.CF CARBON FIBER (CF) 0.50 2.00 7.00 4 50 581 702A.CF.IT 148.000 đ ADD
702A.SV PVDF (SV) 0.50 2.00 7.00 6 50 0 702A.SV.IT 588.000 đ ADD
702A.DG WHITE DELRIN (DG) 0.50 2.00 7.00 5 50 0 702A.DG.IT 186.000 đ ADD

Price excluding tax


710 Plastic Tweezers

View Details

709 Plastic Tweezers

View Details

708 Plastic Tweezers

View Details

707A Plastic Tweezers

View Details