• 6 1/4″ – 160 mm.
• Serrated handles.
• Straight, medium, strong, rhomb serrated, superior finish.
• Suitable to jewellery applications which require holding a diamond very firmly.
• The line serration provides the handles with extra grip and the rhomb serrated tips prevent any possible slips.
• It is also equipped with very hard, stiff tips and body to prevent it from bending. 

Body material: Inox – Stainless steel type S.

• Martensitic higher carbon steel.
• Contains from 12.5 to 14.5 wt% chromium.
• Magnetizable.
• Can be hardened by heat treatment, forming should be done in the annealed condition.
• Less resistant to corrosion than the austenitic or ferritic grades.
• Used where strength and/or hardness are of primary concern and where the environment is relatively mild from a corrosive standpoint.
• Typical applications for the electronic industry, watch-makers, jewelers and laboratory and medical applications in mild aggressive chemical environments.